High-density Polyethylene (HDPE for short), also known as low-pressure Polyethylene, is a type of polyethylene with High crystallinity and a semi-transparent non-polar surface to a certain extent. PE has excellent resistance to most household and industrial chemicals.
HDPE is a thermoplastic resin with high crystallinity and non-polarity. High-density polyethylene is a white powder granular product, non-toxic and odorless, with a density ranging from 0.940 to 0.976 g/cm ³. The crystallinity is 80% to 90%, the softening point is 125 to 135ºC, and the service temperature can reach 100ºC. The melting temperature is 120 to 160ºC. For materials with larger molecules, it is recommended that the melting temperature range be between 200 and 250ºC. It has excellent heat resistance and cold resistance, good chemical stability, as well as high rigidity and toughness, and good mechanical strength. Dielectric properties, environmental stress cracking resistance is also good. The hardness, tensile strength and creep resistance are superior to those of low-density polyethylene. It has good wear resistance, electrical insulation, toughness and cold resistance, but its insulation is slightly inferior to that of low-density ones. It has good chemical stability. At room temperature, it is insoluble in any organic solvents and resistant to corrosion by acids, alkalis and various salts. The film has low permeability to water vapor and air and low water absorption. It has poor aging resistance and is less resistant to environmental cracking than low-density polyethylene. Especially, thermal oxidation will cause its performance to decline. Therefore, antioxidants and ultraviolet absorbers need to be added to the resin to improve and address these deficiencies. The heat distortion temperature of high-density polyethylene film under force is relatively low.
| Nominal physical properties |
Test conditions |
ASTM |
Unit |
value |
| density |
|
D1505 |
g/cm³ |
0.946 |
| Melt Index |
MI 190ºC/2.16kg |
D1238 |
g/10min |
0.18 |
| HLMI 190ºC/2.16kg |
D1238 |
g/10min |
15 |
| Tangent Flexural Modulus |
|
D790 |
MPa |
1150 |
| Drop Impact |
66cm |
D1709 |
g |
90 |
| Spencer Impact Strength |
|
D3420 |
J |
0.35 |
| Yied Tensile Strength |
MD 50mm/min |
D882 |
MPa |
24 |
| TD 50mm/min |
D882 |
MPa |
26 |
| Elongation at Break |
MD 50mm/min |
D882 |
% |
480 |
| TD 50mm/min |
D882 |
% |
640 |
| Elmendorf Tear Strength |
MD |
D1922 |
g |
19 |
| TD |
D1922 |
g |
270 |
| Embrittlement temperature |
|
D746 |
ºC |
<-75 |
Product application:
Arena board (ice hockey board)
Backpack frame
Bulletproof plate
Bottle cap
Chemical corrosion-resistant piping system
Insulator inside coaxial cable
Food storage containers
Automobile fuel tank
Corrosion protection for steel pipes
Electrical and piping boxes
Far-infrared lens
Folding chairs and tables
Geomembranes are used in hydraulic systems (such as canal and bank reinforcement, etc.) and chemical containment
Geothermal heat transfer tube system
Heat-resistant firework mortar
Safety helmet
Hula hoop
Woven bag
Package and shipping:
About Us:
Located in beautiful Taiyuan, Shanxi Province, Shengjinyao (Shanxi) New Materials Co., Ltd. is a company engaged in international health food additives and ingredients. After years of development, our company has become a set of international food additives and ingredients research and development, production, sales as one of the integrated supplier and distributor.
The company insists that product quality is the core of the enterprise, food safety is the lifeline of the enterprise, and has established a long-term and stable strategic cooperative relationship with major domestic manufacturers to ensure high quality and competitive prices.
As the largest distributor in China, we are willing to provide one-stop service for different food additives and ingredients for small batch needs. At the same time, relying on the group's own advantageous logistics platform, it can provide customers with a full range of services such as warehousing, repackaging, sea transportation, air transportation and express delivery to meet the different needs of customers.
FAQ:
Q: What is the payment terms?
A: T/T and L/c
Q: What is your certificate?
A: ISO, KOSHER, HALAL.
Q: What packaging do you have?
A: Iron drum, IBC drum, liquid bag, ISO TANK and bag, etc. Customization is supported
Q: How can I get a sample?
A: We provide you with samples for free, but you have to pay the courier fee.
Q: How long is your delivery time?
A: Within 12 days after receiving T/T deposit or L/c original.
Audited Supplier 
){kind=link}